Holiday 2014 Aluma-Lite, Руководство пользователя

Страница: 27 / 140

5
Driving & Safety - 2
2014 Holiday Rambler Travel Trailer
In Case of Flat Tire
In the event of a flat tire, it is
recommended to call for roadside
assistance. Proper equipment is
necessary to change a tire due to the
size and weight of the recreational
vehicle. A professional service
technician will have the equipment and
training needed to repair or replace the tire.
In the Case of Sudden Tire Failure:
Avoid heavy braking.
Slowly move to a firm, level spot safely
away from oncoming traffic.
Turn hazard flashers on.
Set up flares or triangular reflectors to
alert passing motorists.
Changing A Flat Tire
WARNING:
Tire changing is extremely dangerous.
It is highly recommended that this
procedure be performed by a qualified
professional service technician with
proper training and tools.




Tools Needed to Change Flat Tire:
Hydraulic Jack with at least half the
capacity of GVWR (found on the
Federal Certification Label on the
recreational vehicle).
2” x 12” x 3’ plywood.
Jack stand.
¾” thick plywood block.
Lug wrench.
Torque wrench and socket.
Flares or triangular reflectors.
NOTE:
Hydraulic jack, lug wrench, jack
stand, 3’ plywood, ¾” plywood block,
torque wrench, flares and triangular
reflectors are not supplied with the
recreational vehicle.
WARNING:
Never allow anyone to crawl under the
recreational vehicle while being lifted
by the hydraulic jack or if a wheel
has been removed. Severe injury or
death can occur. Always remain a safe
distance from the road and oncoming
vehicle traffic.
WARNING:
Chock all remaining tires to
prevent accidental movement of the
recreational vehicle.







WARNING:
Do not use rear stabilizer jacks to
change tires or to elevate any wheel off
the ground. Do not use the tongue jack
to elevate any wheel off the ground.
Damage to the tongue jack, stabilizer
jack(s) and recreational vehicle may
occur.
To Change Flat Tire:
Chock the remaining tires to prevent
accidental vehicle movement.
Place the 3’ plywood on the ground. This
will help stabilize the hydraulic jack and
prevent it from sinking into the surface.
Place the hydraulic jack on the 3’ plywood
and raise the jack to snugly contact
frame (Location 1 preferred) or the axle
(Location 2).



CONTACT INFORMATION
Equpment Provder Phone Number
Recreatonal Vehcle
Monaco Customer Support 1-877-466-6226
Tres
Duro 1-800-537-2925
Freestar/Geostar, H188 1-800-537-2925
Goodyear 1-877-484-7376
070175
020306c
Jack at Location
1 (preferred) or
Location 2