6
OPERATING INSTRUCTIONS
CARE AND MAINTENANCE
TROUBLESHOOTING
• Before using and reusing, inspect the product carefully. Discard any product that has cut, damaged
or frayed wire insulation cords, cracked lamp holders or enclosures, loose connections, or exposed
copper wire.
• When storing the product, carefully remove it from wherever it is placed, including trees, branches,
or bushes, to avoid any undue strain or stress on the product conductors, connections and wires.
• When not in use, store neatly in a cool, dry location protected from sunlight.
Lamp Replacement
Disconnect the plug from the electrical outlet and allow the lamp to cool completely before
replacing bulb. Do not touch the bulb when the power is "ON" as it is extremely hot and may cause
electrocution.
• Grasp plug and remove from receptacle or other outlet device. Do not unplug by pulling on the cord.
• Open the zipper opening on the inflatable.
• Open the protective light cover carefully by pressing down on the two locking side tabs
simultaneously.
• Replace lamp with UL-classified 7-watt max. Candelabra-base bulb.
• Do not overtighten the lamp as this may damage the lamp or lamp holder.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The inflatable is
not inflating.
1. The power source is disabled
or the cord may be unplugged.
2. Debris may be lodged in the
motor.
3. The zipper may not be securely
fastened, sealing the inflatable.
4. The temperature may be below
14°F.
1. Check all power cables to make sure that
they are properly connected to a power
source. Ensure that the power outlet or
extension cord has power.
2. Unplug fan unit and remove any foreign
objects or debris from the motor.
3. Make sure the zipper is zipped closed.
4. Remove the unit from extreme
temperatures until weather conditions
improve.
NOTE:
Once fan is unplugged and stops blowing, the inflatable will deflate.
• To deflate, unplug fan. For faster deflation, unzip zipper after unplugging fan. Do not unplug by
pulling on the cord.
CAUTION
Replace only with same type C7, UL-classified 7-watt max, 120-volt candelabra-base lamps.
To reduce the risk of fire, do not deliberately reposition either lamp holder contact.
