3
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Remove all plastic fasteners and tags. These are part of the packaging and should be discarded.
• This item is not a toy and should be used for decorative purposes only.
• For indoor and outdoor use.
Do not attempt to inflate the item during unusually strong winds. If it becomes too windy for safe
operation, simply allow the item to deflate and wait for better conditions before re-inflating. Protect
the electric fan and power cord from direct exposure to water. This precaution will reduce the risk of
electrical shock. When the temperature is below 14°F, the motor may temporarily stop running. The
motor will begin functioning again in higher temperatures.
WARNING
WARNING
READ AND UNDERSTAND ALL INSTRUCTIONS.
• Failure to follow all instructions listed below may result in electric shock, fire and/or
serious personal injury.
ELECTRICAL PRODUCT.
• Keep away from children. Not recommended for children under 3 years of age. As
with all electrical products, precautions should be observed during handling and use
to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
• To avoid the risk of electrical shock, always make sure the figure is unplugged from
the electrical outlet before assembling, disassembling, or relocating.
This product is to be assembled by adults only.
FUSE REPLACEMENT
Risk of Fire: Replace only with same size and type of fuse.
Risk of Fire: Do not replace the attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if attachment plug is damaged.
• Grasp plug and remove from the receptacle or other outlet device. Do not unplug by
pulling on the cord.
• Slide open the fuse access cover on top of the attachment plug toward blades.
• Remove fuse carefully.
• Replace fuse only with 5-Amp, 125-volt fuse.
• Slide close the fuse access cover on top of the attachment plug.
SAFETY INFORMATION
