Holder C 9.72, Руководство по эксплуатации

Страница: 99 / 226

Operating Instructions
145 052
97
C 9700 ... C 9.88 H
Operating the Implements
DANGER
Due to the variety of implements and
connections, however, we recommend a trial
run of the movement at a safe place without
danger to persons or risk of material damage
before starting operation.
Two types of control levers can be installed: control levers
(1) and multi-function levers (4).
Control Lever Functions
You can recognize the functions on the notice plate (2).
NOTE:At the base of the control lever (1) is a
lock knob (7) with which the motions of the
lever can be locked or released.
The following movements are possible:
- Set the lock knob (7) to the middle position (lever free
to move).
- Push the control lever (1) forward:
•
The implement is lifted.
You can stop the movement by releasing the lever.
- To lower the implement, pull the control lever (1)
back:
•
The implement is lowered.
- Pull the control lever (1) fully back:
•
The float position of the implement is turned on, ie
the implement can be moved with external use of
force. The function is on until the control lever is
disengaged again. It always returns to the neutral
position.
Functions of Lock-out Knob
With the lock knob (7) lever movements can be controlled
as follows:
The functions are shown on the plate (8).
-
Knob depressed - lever movement locked
- Knob in middle - lever movement released
- Knob pulled out - float position released
NOTE:
If the lever movement is locked, you can
prevent any unintended movement of the
implement.
Transport lock for road travel.