Holder C 9.72, Руководство по эксплуатации

Страница: 72 / 226

C 9700 ... C 9.88 H
Operating Instructions
70
145 052
Operation
The tractor is stationary.
-
Set the inch knob (5) to 0.
- Set the program switch (6) to range 3 or 4.
- Adjust the PTO rpm with the hand throttle.
NOTE
The engine speed must reach at least 1500 rpm
as the control is only effective beginning at this
speed. You can read the speed on the multi-
function display.
NOTE
You can also switch ranges while driving.
The ranges 3 and 4 provide a speed as required by the load
on the PTO.
This means that if, for example, the snow blower requires
more power when meeting high resistance, the tractor drives
more slowly. As the resistance decreases, the tractor ac-
celerates again to the previously selected ground speed.
Driving range 4 is especially adapted for particular applica-
tions.
- Set the PTO clutch lever (7) fast to the vertical
position to engage the PTO.
- Disengage the parking brake.
Bild_075
6
5
7
Bild_077