HOLDEN Malibu EM 2015, Руководство пользователя

Страница: 179 / 330

Black plate (59,1)
Holden Malibu Owner Manual (GMNA-Localizing-Holden-9272603) - 2015 -
CRC - 11/21/14
Infotainment System 7-59
Navigation Commands (If
Equipped)
To activate the navigation voice
recognition:
1. Press
b
/
g
on the steering
wheel. The audio system mutes.
A voice prompt says,
“ Please
say a command. ” Wait until the
tone is heard before speaking.
If there is no tone, make sure
the volume is turned up.
While voice recognition is active,
the system displays a symbol in
the top right of the screen.
2. Clearly speak the command
“ Navigation. ”
3. Clearly speak one of the
commands in this section.
The following commands only apply
once the Navigation command is
given.
Address or Destination: Allows
an address to be stated as a
one-shot method. The system will
recognise the address if stated all at
once or say a city centre.
Directed Address: Allows an
address to be stated one step at a
time. The format will be City/Suburb,
Street, then House Number.
Intersection: Allows an
Intersection to be stated as the
destination. The format will be City/
Suburb, Street, then Intersection.
Contact: When a phone is paired
to the system, which contains
Address Information stored for
contacts, the address associated
with that contact can become a
route. If the system cannot resolve
the address, an error displays.
Home: Instructs the system to start
guidance to the address saved as
My Home.
Points of Interest or POI: Allows a
Point of Interest to be stated as a
destination. Become familiar with
the POI categories and
sub-categories in the system by
touching Destination from the Home
Page or DEST on the faceplate,
then selecting Point of Interest. POI
commands for Along Route and
Around Destination will be available
if route guidance is active.
Add Waypoint: Allows addition of
individual waypoints or the
destination. The system will ask for
the choice of entry method to
continue. An example is to say,
“ POI
Along Route ” or “ Intersection. ”
Delete Waypoint: When guidance
is active, this command allows the
deletion of individual waypoints or
the destination. If guidance is not
active, the system will indicate the
destination list is empty.
Where Am I?, My Location,
or Current Position:
Instructs the
system to give the current position
of the vehicle.