HOLDEN GEN III V8, Обучение по обслуживанию

Страница: 40 / 113

GEN III V8 ENGINE MANAGEMENT
The signal that is sent from the MAF sensor is sent
in the form of a frequency output. A large quantity
of air passing through the sensor (such as when
accelerating) will be indicated as a high frequency
output. A small quantity of air passing through the
sensor will be indicated as a low frequency output
(such as when decelerating or at idle). The Tech 2
scan tool displays MAF sensor information in
frequency, and in grams per second. At idle the
readings should be low and increase with engine
RPM.
If a problem occurs in the MAF sensor circuit, the
PCM will store a DTC in its memory. The PCM will
turn on the Check Powertrain Lamp, indicating
there is a problem. If this occurs, the PCM will
calculate a substitute mass air flow signal based on
speed density RPM, MAP and IAT.
No field service adjustment is necessary or
possible with this MAF sensor.
GEN III V8 ENGINE MANAGEMENT Page - 35