HOKUTO DENSHI
CO;LTD;
FLASH2
株式会社
11
Programming procedure
It is the same steps to program the memory except selecting the programming control program.
1.
Open the control software, F2WinV2.
Click twice the icon of
F2WinV2
.
2.
Select the MCU type name
“H8SX/1650” or “H8SX/1650”
from the list.
From
“MCU Type” in the menu of “Set”, select “H8SX/1650” in the
pull-down list. Istantly the pull-down box appears next to it, to select the
MOT/HEX file of the programming control program. All the MOT/HEX files
in the specified folder described below are listed in the pull-down list.
3.
Select the transfer rate.
Both initial rate at the beginning of boot mode and maximum rate to
transfer the user
’s program must be appropriately selected.
4.
Select the port status.
According to the connections of the interface, select the buttons in
the port status window to control the target boot mode.
5.
Check the option flags.
It is able to set the options, auto erase, fast boot and erase check.
The optional verifies can be selected here.
6.
Load the target file.
7.
Click
“Exec Write” from the menu of “Write”.
The Directory for the Original Programming Control Program
The programming control program can
’t be selected, if the MOT/HEX file doesen’t exist in the
appropriate folders like in the right description.
Ex.
C:¥Program Files(x86)¥FLASH 2¥FMWR¥H8Sx1650¥
The interface of the target board
See the description in H8SX/1650 in the User
’s Guide.
Attention
！
The execution of programming must
be
clicked
after
selecting
the
programming control program. To
start programming without selecting
the program can
’t be guaranteed.