HOKUTO DENSHI
CO;LTD;
FLASH2
株式会社
10
Execute programming
All the settings and the file loading are completed, and then choose
“Exec Write” from pull down menu of “Write”.
The progress bar indicates programming.
If MOT/HEX file does not have
“.MOT/HEX“ as its file name
extension, a different address is appeared at the progress
indicator. If MOT/HEX file format is correct, it can be renamed in its
extension to
“.MOT/HEX”.
Ending Control Software Operation
Select
“exit” from “File” in menu bar.
＊
All the parameters are saved at closing the control software.
Programming Expanded Memory of ROM-less MCU
FLASH2 can program the expanded memory of the following ROM- less MCU.
Available MCU Type
H8SX/1650,
H8SX/1651
Specified Expanded ROM
MBM29LV800BA-70
（
Fujitsu
）
or equivalents
*TC58FVM5T2AFT-65(TOSHIBA)
、
S29GL032M90TFIR4
（
SPANSION
）
finished the confirmation
Restrictions
To change the programming control program, it is ness carry from the file loading.
The programming control program must be addressed appropriately like following.
MCU
Type Name
Base Address
User program area
H8SX/1650
FF6800h
FF6800h～FFBFFFh
H8SX/1651
Base 0h
～
+3h
Top of the flash memory
（
put 0 into here
）
Base 4h
～
+7h
Bottom of the flash memory
（
put the last
address into here
）
Base 8h
～
+Fh
Version of the programming control program
Base 10h
"write_init" routine
Base 100h
"write_flash" routine
The programming control program must be differed appropriately
according to the flash memory expanded of the MCU.
If the flash memory is different from the specified one, it is able to
generate the appropriate MOT/HEX file from the source recompiling
in the FMWR folders with rearranging the tables and so on.
For the specified flash memory above, there is appropriate MOT/HEX
file as a content of this product.
Make sure that writing in the program expanded memory of ROMless
MCU should be up to 1MB.
Please feel free to ask more information about the minute
specifications for the other types expanded memories. And we can
provide the MOT/HEX file for the different flash memory. But we
can
’t support the user’s original programming control program.
Programming
Each routine is contained in the MCU type
named folder of the enclosed CD, with its source
files. See the directory descriptions below.
Start Boot Mode
Call "write_init" routine
Bus initializing and clear up flash memory
全消去
Start programming
Call "write_flash" routine 128 byte unit
Programming complete
End Boot Mode