Hokkaido HCKI 275 XS, Руководство пользователя

Страница: 24 / 44

-24-
“SLEEP" (ENERGY SAVING) FUNCTION
Before you go to bed, you can press SLEEP button and
the air conditioner will run so as to make your sleep
more comfortable.
1. COOL Mode
After SLEEP function has started off, set temperature
increases by 1°C each hour for 2 hours.
Then, SLEEP mode runs at steady temperature and LOW
fan speed.
Actual temperature is higher than set temperature to
prevent the room from getting too cold.
This function also allows to save electricity.
2. HEAT Mode
After SLEEP function has started off, set temperature
decreases by 1°C each hour for 2 hours.
Then, SLEEP mode runs at steady temperature and LOW
fan speed.
Actual temperature is lower than set temperature to
prevent the room from getting too hot.
This function also allows to save electricity.
3. AUTO Mode
SLEEP function runs according to AUTO operation mode.
To cancel SLEEP function
WARNING!
If Unit is operating and SLEEP function has been selected, the function is cancelled if
whatever button of remote control is pressed.
Press SLEEP button again to cancel the function.
START OF
SLEEP FUNCTION
STOP
OF UNIT
STOP
OF UNIT
Steady temp.
7 hours
1°C increase
1°C increase
1 hour
1 hour
COOL Mode
HEAT Mode
SET TEMPERATURE
SET TEMPERATURE
1°C decrease
1°C decrease
START OF SLEEP FUNCTION
1 hour
1 hour
Steady temp.
7 hours
SLEEP function is available in COOL, HEAT and AUTO modes.
Use of SLEEP function
After the Unit’s start, select COOL, HEAT or AUTO mode
and then press SLEEP button once to activate “Sleep”
Energy Saving function.
In SLEEP mode, fan speed is automatically controlled by
inner electronics.
After 7 hours of continuous operation in SLEEP mode,
Unit will automatically stop.
ADJUST
AUTO
COOL
DRY
HEAT FAN
HIGH
MED
LOW
MODE
FAN SPEED
TIMER ON
SLEEP
ON/OFF
TIMER OFF
AUTO
CLEAN
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME
LED
DISPLAY
CLEAN
AIR
TURBO
DIRECTION/
SWING
~
~
~
~
SLEEP Mode