Hohner M 45/6, Инструкция по эксплуатации и список запасных частей

Страница: 7 / 45

Safety Information
Hohner Maschinenbau GmbH M 45/6 7
1.4 Obligation and liability
The Stitching Head M 45/6 has been built according to state-of-the art technology under
observance of all the recognised safety regulations. However, dangers to life and limb of the user
or third parties and damage to the system or other material assets can still occur during use.
The stitching head should only be used,
• for the purpose for which it was designed
• when it is in a perfect technical condition.
Faults which could reduce levels of safety when using the machine must be eliminated
immediately.
Warranties and liability on the part of the manufacturer are fundamentally covered by the
regulations laid down in our ”General sales and delivery conditions”.
Warranty claims will only be valid if the number label is affixed
(number label on stitching head housing).
1.5 Correct use
The Stitching Head M 45/6 is designed exclusively for binding brochures and leaflets or similar
items.
Any use of the machine contrary to that described above is forbidden, since incorrect use of the
machine can present a danger.
1.6 Organisational measures
The user of machine is required to provide the required personal safety equipment. All existing
safety devices should be checked regularly.
1.7 Safety and protective devices
All safety and protective devices must be correctly attached to the machine and should be in full
working order before every start-up of the machine and
Stitching Head M 45/6 .
Safety and protective devices may only be removed:
• After the machine has come to a standstill
and
• As security against the machine starting up again.
1.8 Non-formal safety measures
The Operating Manual must be kept so that it is permanently at hand at the machine with
Stitching Head M 45/6 . There are also generally valid local regulations concerning accident
prevention and environmental protection measures which should be made available and observed
in addition to those described in the Operating Instructions.
All safety and danger signs on the machine should be maintained in a legible condition and should
be renewed where necessary.
1.9 Staff training
Only trained and instructed personnel may install, operate, set and maintain the stitching head.