Wild Boar Audio Contact Information
Email: [email protected]
Tel: 705-719-6361
Thank you for your purchase of Wild Boar Audio’s WBA 800.4RG KIT for 15+
Road Glide Models. We want your kit to work as well as it was designed to, so
if you have any questions or concerns, please email: [email protected] or call
us during regular business hours (EST) at (705)-719-6361. If you still need help,
please consider a professional installation by your dealer.
1) In order for your new amps to work properly, your radio must have the
proper “flash” installed. Different radio flashes are used by the “MoCo”
based on the factory audio system that comes on different model bikes.
Re-flashes can be done at any OEM dealer, or a “Techno Research”
dealer. You can find the nearest Techno Research dealer by visiting:
https://technoresearch.info/dealer-map
The required flash to make these amps work best is called “front and rear
speakers without amp” and will give highest quality sound and best reliabil-
ity. It should be noted that non CVO Ultra models and Ultra Trike models
come from the factory with the required “front and rear speakers without
amp” flash. If using the Techno Research unit, use the Wild Boar Audio
flash built into that system.”
Radio’s fader will not work without
correct radio re-flash installed.
This manual is written in 3 major sections:
Section 1:
Front Speaker Installation
Section 2:
Speaker Lids/6x9’s
Section 2:
Amplifier Installation
IMPORTANT: Read the next page before installing!
DO NOT PAINT THE 6”x9” TWEETER ASSEMBLY HOUSING!
The tweeter is permanently attached to the tweeter assembly
to make sure nothing, such as paint, obstructs the
BUILT IN DRAINAGE. In the event of warranty, Hogtunes replaces
the tweeter assembly as one piece, and therefore
assumes zero responsibility for paint!
2
