Hogtunes Wild Boar Audio WBA 800.4SG KIT Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 20

Hogtunes Wild Boar Audio WBA 800.4SG KIT Скачать руководство пользователя страница 16

Please Note: Having the correct flash

installed in your radio is the preferred

condition in all cases. The fader will NOT

work without the correct flash installed.

As explained at the beginning of this manual, in order for the system to work

properly you will need to have the correct “flash” in your radio. Visit an HD

dealer, or link:

https://technoresearch.info/dealer-map

Any dealer on that web page should be able to help as there is a “Wild Boar

Audio” setting in their system which makes it very easy. You either want to have

the correct flash installed, or verify that the correct flash is installed if you are not

sure. There is a 3 position switch “Radio Flash Selector” on the side of the amp

marked A, B, and C. Understanding the correct position for your application is

VITAL in the proper performance of this system.

If you are installing this amplifier on a Ultra Classic model, the factory flash that

came with your bike is the preferred “4 speaker no amp” flash. If your bike has

had no previous audio installed, you will not need a re-flash. If you have questions,

please call our tech support team before proceeding!

SYSTEM ADJUSTMENT

SYSTEM ADJUSTMENT

SYSTEM ADJUSTMENT

16

«
...
14
15
16
17
18
...
»

Содержание Wild Boar Audio WBA 800.4SG KIT





















Отзывы:

Нет отзывов