15
Step #11: Turn the stereo on and, at low volume, test to make sure all four
speakers are working.
Step #12 Re-install the seat making sure the amplifier’s “+” and “-” connectors are
positioned in such away so they will not bend or break when the rider’s
weight is on the seat.
This is the best time to take a few minutes to “clean up” the wiring
and secure using supplied zip-ties.
This section is VITAL to the correct operation
of the system, please make sure you read
and understand it, or contact us!
Step #1: This kit has been designed to give great sound with the radio bass and
treble controls in the middle position. Adjusting the bass and treble up
or down no more than 3 bars from center will give excellent and reliable
performance for most kinds of music. If you choose to exceed this
suggestion and play at high volume levels, you may damage your
system!
Step #2: The Wild Boar Audio 400.2R amplifiers are HIGH POWER amplifiers
specifically designed to work on the small charging system of a
motorcycle. DO NOT start your motorcycle with the radio past half
on the volume dial! When the start button is hit, all available current
goes to your bike’s starter which “starves” the amplifier and may cause
damage to your speakers!
SYSTEM ADJUSTMENT
SYSTEM ADJUSTMENT
SYSTEM ADJUSTMENT
Before re-installing outer fairing, turn front wheel
to each extreme side making sure any wiring is
not impeding the steering of the motorcycle.
FAILURE TO DO SO CAN RESULT IN
SERIOUS INJURY OR DEATH!
Re-install the fairing and the system is now ready to enjoy!
