3
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
EN
USER MANUAL
3-IN-1 HT2C401 GAS SOLDERING IRON
Thank you for purchasing our product. Product manufactured to conform to the
highest standards will ensure trouble-free operation for years provided that it is
used in accordance with user manual and maintained properly.
PRODUCT CHARACTERISTICS
3-in-1 gas soldering iron is intended for household use for soldering, heating, drying
or pyrography. Powered by a built-in container with a mixture of propane and buta-
ne gases, it allows to work away from electricity sources. The soldering iron is not
intended for commercial use. Supplier shall not be liable for any damage resulting
from failure to follow safety regulations and recommendations of this user manual.
Important: Read user manual carefully in order to familiarize yourself with the
device and its connection before first use. Keep this manual for future reference.
GENERAL SAFETY CONDITIONS
It is responsibility of the owner and user to read, understand and follow these rules:
IMPORTANT:
Please read this manual carefully. Please pay special attention to the requirements for safe use, warnings and
notes. Use this product correctly and carefully, only for purposes for which it is intended. Failure to follow these instructions may
result in damage and/or injury and it will void the warranty. Please keep this manual in a safe place for future reference. When
giving the device to another person, please also hand over a user manual.
• Please use the device only for the purpose intended for the device.
• Please keep the device away from heat, direct sunlight, moisture (never immerse it in liquid substances) and sharp edges. Please do not
operate the device with wet hands.
• Do not leave the device unattended when it is in operation. Always turn off the device before leaving the room.
• Regularly check if the device is not damaged. If damage is found, stop using the device.
• For the safety of children, please do not leave the packaging parts freely accessible (plastic bags, cartons, Styrofoam, etc.).
WARNING
Do not let children play with the foil. Danger of suffocation!
This device is not intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and / or
skills, unless they are accompanied and supervised by persons responsible for their safety or they have received precise instructions
for use of this device and they understand the consequent risk. Only children over the age of 8 and under the supervision of a person
responsible for their safety or if they have received the instructions for using this device and understand the risks involved may use this
device. Children are not allowed to play with this device.
EQUIPMENT
3-in-1 gas soldering iron is complete and no assembly is required. The product is delivered with an empty gas container.
TECHNICAL PARAMETERS
Catalogue number - HT2C401;
Type of feed gas - butane or a mixture of propane-butane gases;
Gas container: built-in with a capacity of 7ml;
Flame temperature [OC]: max 1300;
Thermal load [W]: 220;
Gas consumption: 16g/h;
Weight (without gas container) [g]: 65.
SAFETY CONDITIONS
Soldering iron can only be used with butane gas or a gas that is a mixture of propane and butane. Soldering iron has its own gas conta-
iner that should be refilled with pressurized containers using the appropriate adapter attached to the gas container.
Always read user manual before connecting the gas canister.
Soldering iron is supplied by factory in a complete and regulated state. Do not make any changes in construction or settings of the devi-
ce. Check if seals between the soldering iron and the gas container are correctly installed and if they are in good condition before each
use. In the event of defects or faults, do not use the soldering iron. According to national requirements for supply of combustion air and
avoiding the hazardous accumulation of unburned gases, use the soldering iron only in a well-ventilated area. Do not use the soldering
iron near flammable materials. Never direct a flame at people or animals. In the event of a leak (gas smell), immediately turn off the
soldering iron by moving the lock button towards the symbol marked „0” and immediately take it outside to a well-ventilated area where
the leak can be found and removed. If it is necessary to send the device to the manufacturer or service, empty the gas container and then
pack the soldering iron properly.
Service address: GTV Sp. z o.o. Sp. K., ul. Przejazdowa 21, 05-800 Pruszków, Poland.
Use the soldering iron in clean places, away from flammable or greasy materials, use eye and hand protection measures.
