3
Adres producenta/ Adresse des Herstellers/ Manufacturer’s Address/ Адрес производителя
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21, 05-800 Pruszków
EN
USER’S MANUAL
TRANSFORMER SOLDERING IRON
HT2C311
Thank you for purchasing our product. Manufactured to a high standard, this
product will, if used according to these
instructions, and properly maintained, give you years of trouble free per-
formance.
ENVIRONMENTAL PROTECTION
Symbol indicating the selective collection of waste electrical
and electronic equipment. Used electrical appliances are re-
cyclable materials - they must not be disposed of in household
waste because they contain substances that are hazardous to
human health and the environment! We ask for active help in
economica management of natural resources and protection of
the natural environment by handing over the used device to the storage po-
int of used electric devices. To reduce the amount of waste removed it is
necessary to reuse, recycle or recover it in another form
GENERAL INFORMATION
This device is intended for use in both private households and for commer-
cial use. The heat gun is designed for blowing with hot air stream. Thanks
to this, it can be used, among others for removing oil paints and varnish
coatings, soldering with tin alloy (60% Sn 40% Pb) with melting temperature around 400˚C, shrinking of heat-shrink materials, heating
of objects, thawing, drying, welding of plastic elements, etc. Any other uses are not recommended and can lead to property damage
or even injury. Use the device only in accordance with these operating instructions. The manufacturer accepts no liability for damage
caused by improper use.
GENERAL SAFETY CONDITIONS
It is for the owner and user to read, understand and abide by the following rules:
IMPORTANT:
Please read this manual carefully. Please pay special attention to the requirements for safe use, warning and
attention. Use the product correctly and with care for the purposes for which it was intended. Failure to do so may result in
damage and / or damage to health and will void the warranty. Please keep the manual in a safe place for further use. When
handing over the device to another person, also hand it over to the user.
• Please use the device only for the purpose intended for the device.
• Keep the device away from heat, direct sunlight, moisture (never immerse in liquids) and sharp edges. Please do not operate the
device with wet hands.
• The operating device should not be left unattended. Always switch off the device before leaving the room.
• Regularly check the device for any defects. If damaged, stop using the device.
• For children’s safety, please do not leave freely accessible parts of the packaging (plastic bags, cartons, polystyrene, etc.).
WARNING
Do not let children play with foil. Danger of suffocation!
This device is not intended for use by persons with limited physical, sensory or mental abilities or lack of experience and / or skills,
unless such persons are accompanied and supervised by persons responsible for their safety or have received precise instructions
for using this device and understandable this risk. Children may only use this device over the age of 8 and under the supervision of a
person responsible for their safety, or if they have received instructions on how to use this device and understand the resulting risks.
Children must not play with this device.
TECHNICAL DATA
Parameter
Unit of measure
Value
Index
HT2C311
Mains frequency
[V]
~230
Rated power
[Hz]
50
Tip temperature
[W]
200
Operation type
[˚C]
A: 70~200
B: 200~350
C: 350~500
Electrical insulation class
S2 20% (12/48s)
Mains frequency
II
