SPECIFICATIONS
Solar panel:
Polycrystalline solar panel 4V 3W
Rechargeable battery:
LiFePO4 battery 3.2V 4500mAh
Illumination:
4pcs LED each lamp. Total 8pcs LED. Two mode of lighting: dim light and bright light
Charging time:
about 5-7 hours
Duration time after battery fully charged:
dim light (8-12 hours), bright light (5-6 hours)
The package includes:
1x solar panel, 2x spotlights, 3x spikes, 7x screws, 7x expansion pillars
IMPORTANT SAFETY DETAILS
1.
This product must be installed by a qualified electrician in accordance with instructions provided and in compliance with recognised electrical
and safety regulations relevant to the country it is being installed.
2.
This product may NOT be installed by minors or people with a mental disability.
3.
Before using the solar light for the first time, leave the light under direct sunlight for about 6-8 hours. The light will achieve optimum light
output after the enormous exposure to the sunlight.
4.
Please keep the surface of the solar panel clean, to make sure the product works at it’s best performance.
5.
It is important to install the light in a location that receive full sunlight each day, away from the shade caused by trees, buildings etc. Shady
locations will not allow the battery to be fully charged and will reduce the hours of night time light.
6.
This solar panel includes a built-in photo sensor, which detects the level of surrounding natural light and controls when the light will
automatically switch on and off. The solar panel should be placed at least 2 meters apart from another spotlight and away from other night
light sources as this might keep the solar lights from automatically turning on at dusk.
7.
The performance of the solar light is dependent on the geographical location, weather conditions and seasonal sunlight availability. On cloudy
days and during winter, the solar light will not receive as much direct sunlight, resulting in reduced brightness and reduced operating time.
9.
Dispose the used battery properly! Do not dispose the battery in fire!
FUNCTION
TURN ON THE SWITCH
The switch is located at the back side of the solar panel. Turn on the switch, the lamp will start to work automatically (the product has a light sensor
built-in to enable the lamp to turn off light and charge during the day and turn on the light during the night full automatically).
