Hoffman 99411400, Руководство по установке

Страница: 13 / 24

87569072 11 E 2005 Hoffman Enclosures Inc.
Wall − Mounted Disconnect Enclosures
Installation Instructions for Square D 9422
Variable Depth Operating Mechanisms
TABLE 1
Sub − Panel Drilling
Square D
Operating
Mechanism
No. Of
Holes
Mtg. Hole
Position
Hole Size
H
8” Deep
H
10” Deep
H
12” & 16”
Deep
J X Y
TCN, TCF 4 1,4,6,7 10 − 24 2.25 4.59 9.13 .38 5.50 4.50
TDN, TDF 4 1,4,6,7 10 − 24 2.25 4.59 9.13 .38 5.50 4.50
TEN, TEF 4 1,4,6,7 10 − 24
Do Not
Install
4.59 9.13 .38 5.50 4.50
TC 4 1,2,58 10 − 24 2.50 4.41 8.94 .38 5.13 6.50
TD 4 1,2,47 10 − 24 2.25 4.59 9.13 .47 5.19 5.25
TE 4 1,2,3,4 1/4 − 20
D N t
2.97 7.50 1.84 5.50 6.50
TF 4 1,2,3,4 5/16 − 18
Do Not
Install
Do Not
Install
6.88 1.31 9.44 8.00
RG1 4 1,2,3,4 8 − 32 2.25 4.59 9.13 1.47 1.18 3.94
RN1 4 1,2,3,4 8 − 32 2.78 5.13 9.66 1.38 1.50 5.13
RP1 4 1,2,3,4 10 − 24 2.78 5.13 9.66 1.56 1.50 7.13
RR 1
4 1,2,3,4 1/4 − 20
Do Not Do Not
9.00 .19 6.63 6.56
RR − 1
4 1,2,3,4 .375 Dia.
Do Not
Install
Do Not
Install
7.63 2.50 2.00 9.25
NOTE: Square D variable depth disconnects are provided with connecting rods that must be cut to length to fit the
enclosure depth (from flange surface to subpanel surface). See table 2 and Square D instructions.
TABLE 2
Bulletin Hoffman Disconnect Enclosure Description
Enclosure Depth
C
Square “D”
D (1)
8.00 6.88
A25 Wall Mounted Disconnect Enclosure
10.00 8.88
A25 Wall Mounted Disconnect Enclosure
12.00 10.88
16.00 14.88
1) This dimension is used to determine length to cut Square D operating rods. Use .070 for “T” dimension.