HOFFEN POJM180656, Инструкция по эксплуатации

Страница: 32 / 38

3
32
4. Put food products into the blender jug. You may put food products into the
blender jug through the opening in the lid. To do so, turn the plug to the left
and remove it. After putting food products into the jug, put the plug back into
the lid and turn the plug to the right.
5. Place the lid back and turn the lid to the right so that the plastic notch is flush
with the jug spout.
Attention!
There is a safety mechanism in the blender mounting socket that prevents
the machine from starting if the blender has not been properly mounted in the
socket or if the lid has not been properly attached.
6. Connect the plug to the power supply socket.
7. Set the required rotation speed to run the device. The operating mode selector
is the same as for the mixer. Please refer to the section entitled Operation
mode selector description.
Warning!
Do not put any forks, knives or spoons into the jug during blender operation.
8. When the task is finished, move the operation mode selector to the “0”
position and disconnect the appliance from the mains
9. Remove the blender from the socket, remove the lid and pour the blended
food into the bowl.
7.5 Useful tips on blending
• Be careful when adding and mixing hot ingredients or removing the lid from
the blender container, as the steam in the jug can cause scalding.
• Never use this device to process boiling liquids.
• Liquids must be under 50° C, and no more than 700 ml should be poured in
at once.
• Do not exceed the maximum capacity of 1,500 ml marked on the blender jar.
Keep in mind that some mixtures increase their volume during mixing.
• During operation, ingredients may cling to the walls of the jug without sliding
into the blades. In this case, turn the device off, disconnect the device from