HOFFEN CSI-8307, Инструкция по эксплуатации

Страница: 31 / 34

3
31
2. Add water to the reservoir until it is half full.
3. Set the temperature control knob to “MAX”.
4. Wait for the iron to reach the desired temperature – then the heating LED will
go off.
5. Disconnect the iron from the mains.
6. While holding the iron horizontally over a sink, move the steam control to the
“MAX” position and press the “CLEAN” button.
Boiling water and steam will be emitted with dirt washed out from the openings
in the ceramic soleplate.
7. After the iron has cooled down, place it (preferably) on an old piece of fabric.
Thus, the soleplate will remain dry during storage.
Funkcja ANTI-CALC
ATTENTION!
Despite using the ANTI-CALC function, we recommend using distilled and/or
demineralised water.
The device does not contain any user-serviceable parts. Do not attempt to make any
repairs on your own. Always have a specialist make repairs.
If the power cord is damaged, it has to be replaced with an identical one by the
manufacturer, service or a qualified person.
9. REPAIR
• Wait until the iron cools down.
•
Empty the water reservoir.
• Wind the cord around the iron.
•
Store the empty iron upright on a stable surface, with the base attached.
• Always keep the iron in a dry, well-ventilated location inaccessible to children.
• Protect the device against vibration and shock during transport.
10. STORAGE AND TRANSPORT