[39]
EN
VA
CUUM CLEANER
Cleaning the air exhaust filter
• On the back of the appliance is a small
grill that hides the air exhaust filter.
• Remove the plastic grille, detach the filter,
clean it and after it has been thoroughly
dried, reinstall it in the appliance.
• Replace the grille to lock the filter.
Cleaning the engine filter
• Open the cover (C) and remove the bag
(P) together with the holder (Q) to gain
access to the engine filter.
• Remove plastic grille that acts as the
filter holder by pulling it upwards until it
disengages from the side brackets.
• Remove the filter from the grille, clean it
and after it has been dry, reinstall it on
the grille and on the appliance.
• Reinstall the bag (P) with its holder (Q) on the unit and close the cover
(C).
Storage
• Switch off the appliance on the on/off button (G) and remove the plug
from the wall socket.
• Press button (F) to automatically rewind the supply cord. During this
process, keep the plug in your hand to avoid the abrupt movement of
the supply cord.
• Retract the bristles of the floor brush (L) to avoid damaging them and
close the telescope tube (K).
• To store the appliance vertically, insert the parking connector located
at the floor brush (L) into the parking slot on the back side of the
appliance.
• Store the appliance in a dry and ventilated place, away from sources
of heat and direct sunlight.
