EN
[36]
VA
CUUM CLEANER
• After use, remove flexible hose (H) from the appliance body by pressing
the side tabs on the hose (H) and pulling it out.
• Automatically rewind the supply cord by pressing the button (F).
• Attention! When roll the power cord, always hold the plug and the cord
to avoid getting caught in any piece of furniture or that the plug strikes
the body of the vacuum cleaner.
Dust bag replacement
• Detach the hose (H) from the inlet (D).
• Pull up the holder (Q) with the dust bag (P) while pressing the tab on
the right side of the holder (Q).
• Detach the bag (P) from the holder (Q) by sliding it in the opposite
direction of the holder (Q). Insert a new bag into the holder (Q) and fit
the holder into the frame, inside the cavity (see fig 2). Make sure that
the dust bag (P) is properly attached and secured to the holder (Q),
close the cover (C) and fit the flexible hose (H) back into the inlet (D).
Â
ATTENTION! Make sure that the dust bag (P) touches the above
signalized tab, otherwise the cover(C) can not be closed. If the dust
bag does not touch the tab, reinstall it correctly.
Â
ATTENTION! Change the dust bag (P) often. The design of the vacuum
cleaner prevents improper installation of the dust bag (P) and the use
without the bag (P), so that whenever you feel resistance when closing
the cover (C) or putting the vacuum cleaner into operation, check the
bag installation ( P).
