HOFFEN
EN
HOFFEN
25
Switch on the device and guide the toothbrush tip slowly, pressing it gently against the
tooth surface and touching gums. Single cleaning cycle lasts 4x30s. It is worth dividing
the surface of your teeth into four parts so that you can clean each one for 30 seconds.
After 2 minutes of operation, the brush will turn off.
During the first dozen or so uses of the gums may bleed slightly (not very frequent
phenomenon) or you may feel discomfort (a frequent phenomenon among people
who have not used mechanical toothbrushes so far). This usually happens when the gums
are not used to the new washing technique and the amount of brush vibrations. In such
case, it is recommended to use "Massage" mode. If, after 2 weeks of using the toothbrush
in the recommended way gums still bleed, stop using the device and consult a dentist.
USING THE STERILIZATION CHAMBER
Sterilize only clean tips.
The charging base is equipped with a sterilization chamber which enables sterilization
of brush tips with UV-C radiation after each use.
Before using this function, gently shake the tip to get
rid of any excess water remaining after cleaning. Open
the sterilization chamber cover, put the tips in the tip
container, placing them on the pins at the bottom of
the container so that the brushes face the UV lamp.
Make sure the charging base is plugged to power
supply.
Close the sterilization chamber to start the
sanitizing process. At this point a glow with a slightly
blue tint will be visible from under the cover of the
sterilization chamber, signalling the operation of the
UV lamp. The sterilization process takes about 7
minutes, after that time the sterilizer will automatically
switch off and the glow will no longer be visible.