HOFFEN
EN
22
HOFFEN
8. USE
Mounting and dismounting of the kit components is only permitted when the unit is
switched off.
Carry out all the steps gently, careful not to damage the kit components.
Before and after usage, check each component for signs of damage. Damaged
components must not be used, as this may cause damage to the user's body.
Do not use the tip for more than 3 months after first use. Teeth or gums might get
injured due to excessive use of single brush or bristles wearing off.
MOUNTING AND DISMOUNTING OF BRUSH TIPS
Take out the toothbrush and one of the tips from the packaging. Insert the tip onto the
protruding spindle from the brush handle so that the bristles of the tips point in the
same direction as the switch and diodes on the brush handle. Press the two parts
together in a firm motion. This process is illustrated in the following figure. A small
space of approx. 0.5 mm will be left between the brush tip and the brush handle. This
is the result of the design of the device. Do not be press against the brush handle
forcing the tip to come into contact with the brush.
To remove the tip, gently pull the tip upwards until it is detached from the brush handle.