NSW
02 9644 7144
QLD
07 3252 5366
VIC
03 9544 2211
WA
08 9349 2972
FIREbeam Xtra User Manual
10
2-3-0-2700/ISS2/21.OCT19
More power will be output than is necessary to cover the distance and these levels will then
be reduced once the auto align process takes place. The air quality figure at this point
should normally stay at 0%. Pre-Align Complete will now be indicated.
Press enter to accept Pre-Alignment and confirm these settings by pressing the right key and
enter into Manual Alignment.
The FIREbeam Xtra is looking for the far wall of the building and in some shorter distance
applications will stop raising the IR Power when it’s sufficient for the distance. In these
cases, you can press Enter to accept the Pre-Alignment then the right key and enter into
Manual Alignment.
CAUTION: If you have not allowed the 50cm radius and the beam encounters an obstruction
this will also stop raising the IR Power and halt the Pre-Alignment as the beam will assume it
has found the far wall.
You will need to identify and move the obstruction or reconsider the positioning of the beam.
You can identify that the beam is obstructed if the right-hand figure (Air Quality) has risen
and is fluctuating between 5%-10%.
Obstructions near the head will disturb the pre-alignment process and care should be taken
to ensure no solid objects are close to the beam path.
