Hobym Observatory TiTaN TCS, Руководство по эксплуатации, Страница: 61 / 62

61 / 62
 When replacing the battery, please refer to the above explanation
i. When automatic meridian flip function is undesired for photographing.

Select Disable from [Meridian]-[Meridian Flip] Menu
 When disabling the meridian reversal function, always be careful of moving
the telescope.
In this case, it is programmed to reject the GOTO command which goes
below the horizontal line.
j. When it automatically stops with a melody sound while tracking.

The RA Auto Stop function operated.
Check the time and location settings to accurately calculate the meridian
information.
 Check the RA Auto Stop function.

Please check the message at the bottom of the screen
k. When TCS receives a command from Object / GOTO, the error message is
displayed without moving.

Check time and location setting.

The first star has to be synced and Object / GOTO.
 Do not GOTO near the horizon.
l. PEC is turned off but dimmed gray color “PEC” appears in display.
 It is normal. Indicates that the PEC function is disabled, but has valid PEC
training information.
If there is no "PEC" indication, you can not use the PEC function until you
refresh the PEC training.
m. Turning PEC on worsens the guide performance.

In a case the load on telescope caused a slip after PEC training.
 In a case that the position was lost due to the stall of motor.
 In a case that the power was turned off without Parking.