Hobym Observatory TiTaN TCS, Руководство по эксплуатации, Страница: 19 / 62

19 / 62
Update mode turn the power off and on.
However, never turn off the
power after the firmware
has been started.
U/I Mode
B : Begginer Mode
E : Experet Mode
"Observatory" / "Date / Time" does not need to be saved after changing the setting.
Immediately after entering the Date & Time is reflected in the internal clock.
"Safety" / "Landscape" does not need to be saved after changing the setting.
It is an execute command, and this value is not stored in memory.
When you reboot, it will always be initialized to “Sky View” mode.
[System] / "Tracking rate" does not need to be saved after changing the setting.
It is an execute command, and this value is not stored in memory.
When you reboot, it will always be initialized to “Sidereal Tracking Rate” mode.
[System] / "U/I Mode" must be saved after changing the setting.
This setting is reflected in the menu after rebooting.
“PEC” / “PEC Training” does not need to be saved after changing the setting.
If training is started and training is successful by the “PEC” / “PEC Training” / “Stop”
menu, it is auto-saved in separate memory for PEC.
"Security" / "TCS Name" does not need to be saved after changing the setting.
Immediately after entering the TCS Name is reflected in the internal special memory.
You do not need to save the “Telescope”, "Object" and "Help" menu groups.
These menu groups are execution commands.
Menus not specifically mentioned above must be saved after setting values have been
changed so that the changed values can be read after rebooting.
[RA] and [DEC] menus must be saved after setting value is changed to reflect the
changed result. The TCS performs the calculations and initialization related to the motor
again when setting values are saved.
Under normal operating conditions, if the temperature of the TCS exceeds 40 ° C, it may
be overloaded.