User Manual -Solar Pumping Inverter
10
Inverter State
Show the Warring, Error and Temperature of Solar Pumping inverter
Tank /Well’s water status Display
Show the water of Tank and Well status.
If the water of tank is full or water of well is empty , will automatic stop
running and show the status
Error History
For inquiry the Error flag history
Press the “Enter” key to enter this menu, then “UP”/”Down ”to select the
command for inquiry more record or clear the history.
Note: if current cursor is on More, press “Enter” key to confirm view more
records, then “UP”/”Down” key to change the records number.
Machine ID
The Unique Serial id of inverter
MFD: manufacture Date
Verify the Password to Enter the Setting Menu
Original is: 0000
System Setting
“UP”/”Down” to change Menu Item
Working Time
For Inverter working time set. If the system time within this setting then
work, or else standby.
Low Power of Solar Panel to Protect the Pump
Solar Panel output power is low and no water output in the
morning/dusk ,also in cloudy days
Inverter State
No Warning!
No Error!
Temp: 35. 0(Degree)
)
Water State
Tank Empty
Well Full
Error History
Error: 32
11:43 02/09/15
More
Clear All
Machine-ID
4015
MFD: 17/15
Enter Into
Setting Menu
0 0 0 0
Verify the PW
System Setting
1. Working Time
2. Solar Power
3. Dry-Run Detect
4. Tank Sensor
5. Well Sensor
6. Output Freq
7. Output Voltage
8. Gprs Password
9. Time Calibrate
10. System PW Set
11. Factory Reset
Working Time
Start – Stop (H:M)
Time: 0 :0 – 23:59
Solar Low
Power to Stop
MinFreq: 10 Hz 5 M
Stop Time: 20 M
