EN
Instruction Manual
Flight Trimming
Steering (Rudder) trim:
• When the aircraft drifts left or right while
the steering stick is at the neutral position
(centered), push the steering trim button by
one “beep” increments OPPOSITE the direc-
tion of drift.
• Adjust trim so the aircraft fl ies straight when
the control stick is neutral.
Elevator trim:
Only trim the aircraft at half throttle.
When
trimmed correctly, your aircraft climbs steadily at
full throttle and will fl y level at half throttle.
• When the aircraft’s nose drifts up or down
while the elevator stick is at neutral (centered)
position, push the elevator trim button by
one or two “beep” increments OPPOSITE the
direction of drift.
• Adjust trim so the aircraft fl ies straight and
level when the elevator stick is neutral.
You can return any trim setting to neutral by
holding down the opposite trim button until
the neutral (3 beep tone) occurs.
The LED Indicator
The LED (
A
) on the transmitter displays two
functions.
Function 1:
Indicates the transmitter is in High
or Low Rate (for more information see the
Dual
Rates
section). The transmitter’s default Dual
Rate position is low rate.
LED Slow Blinking
– Indicates that the trans-
mitter is in low rate.
LED Solid
– Indicates that the transmitter is in
high rate.
Function 2
: LED fl ashing with beeps indicates
that the transmitter has been put into bind mode
(for further explanation see
Binding
section).
Steering (Rudder) Trim
A
Tip!
Elevator Trim
7
