background image

®

Mini Apprentice

®

 S 

EN

6

Sensor Assisted Flight Envelope (SAFE) Technology

Sensor Assisted Flight Envelope (SAFE) Technology

SAFE technology is a revolutionary fl ight training system designed to 
give you a stable platform for safely developing your fl ying skills. This is 
not an autopilot or self-guiding robot. The sensors and software in this 
system help you fl y the aircraft where you want to go while decreasing the 
risk of an out-of-control crash.  You can progress through the Beginner, 
Intermediate and Experienced fl ight modes as your skills increase, all with 
the confi dence of an optional Panic recovery mode. At any time during a 
fl ight you can switch between the 3 fl ight modes or use Panic recovery to 
get your aircraft to a safe fl ying attitude.

Beginner Mode 

•  Envelope limit: Pitch (nose up and down) and Roll (wing tips up and 

down) angles are limited to help you keep the aircraft airborne

•  Self-leveling: when the pitch and roll controls are returned to neutral, 

the aircraft returns to level fl ight

•  Stability assisted takeoff and landing 
•  Throttle based climb and descent 

Intermediate Mode 

•  Natural Flight Experience: In normal training fl ight conditions, the pilot 

experiences natural AS3X

®

 fl ight for smooth handling and outstanding 

precision 

•  Large Flight Envelope: The pilot is only prevented from entering extreme 

fl ight conditions outside the training fl ight envelope

Experienced Mode 

•  Natural Flight Experience: The pilot experiences natural AS3X fl ight for 

smooth handling and outstanding precision

•  Unlimited Flight Envelope: No limit on Pitch and Roll angles (airframe limited)

Panic Recovery

•  Immediate recovery to a safe fl ying attitude
•  Return all transmitter controls to neutral for the quickest recovery
•  This mode is intended to provide the pilot with the confi dence to 

continue to improve their fl ight skills

 

AS3X® technology

Horizon Hobby has always made RC sport, scale and unique aircraft with 
the kind of performance experts appreciate. Now the exclusive Artifi cial 
Stability 3 axis (AS3X) system helps take performance expectations in 
aircraft a quantum leap higher. Based on the successful use of MEMS 
sensor technology within the AS3X Stabilization System essential to Blade

®

 

ultra micro fl ybarless helicopters, the specifi cally tuned AS3X System for 
airplanes helps invisibly correct for turbulence, torque and tip stalls when 
encountered. Furthermore, the outstanding control agility delivers an ultra 
smooth, locked-in feel that obeys your every command with performance 
that’s natural feeling. It’s so gratifying, in fact, that it’s as though you’re 
the RC pilot of an expertly tuned, giant-scale aircraft. AS3X will change the 
way you’ll want to fl y now and in the future. To see what we mean, go to 
www.E-fl iteRC.com/AS3X.

Roll

Pitch

Roll

Pitch

Roll

Pitch

1. 

Pilot loses control of the aircraft 
in any fl ight mode.

2. 

Pilot presses and holds the Panic 
Recovery button and returns all 
other controls to their neutral 
position. The aircraft will roll 
wings level and pull out of a 
dive...

3. 

...once the aircraft is fl ying 
straight and level, the pilot 
releases the Panic Recovery 
button and continues a gentle 
climb to a safe altitude.

1

2

3

IMPORTANT: 

Aircraft will recover to a safer attitude even if sticks are held. 

Some control input is still used with panic activated.

SAFE Flight Modes 

Содержание APPRENTICE S





























Отзывы: