Hobbytec PJR Series, Руководство по сборке

Страница: 7 / 24

18
A part
Middle frame cap
Small truss screw
5×10×10
（ Roof rafter set ）
Roof retainer (middle)
（
Beam
・
depth set
）
Gutter
Middle frame
Roof retainer (end)
（ Beam ・ depth set ）
Sealing
Sealing
Sealing
Sealing
Rain water cover
Sealing
Sealing
Middle frame
Side frame
Middle frame
Side frame
Roof retainer
(end) Roof retainer
(middle)
Small truss screw
5×10×10
Small truss screw
5×10×10
（ Roof rafter set ）
■
Detailed section drawing
Peel off the back sheet of
the rain water cover and
attach to the end upper face
of the middle frame and do
sealing work around it. Do sealing work to the
insert part of cap into
middle frame and side
frames.
※ When screwing the roof retainer (end), insert the
end part of roof retainer into the gutter cap before
screwing the second screw from the post side.
■
A part
detailed figure
Do sealing work to the insert part of roof retainer (end) into middle frame. Step2
Step3 Step3
12
Installation of roof retainer
Insert the end of roof retainer into the
middle frame, and fix from the middle
frame side with small truss screw 5x10x10. Step1
If the screw of installing the roof retainer is tighten
too much, the screw will run idle. Tightening torque
is about less than 1.5Nm (15kgfcm).
If the screw head leans when installing the roof
retainer, it will cause water leakage (water will enter
from the screw head clearance), so install it not to
make clearance.
Notice
For D36 to D60(Wide beam) For D72/D80 triple type
7
PJWY-W43B-2
PJWY-W43B-3
PJWY-W43E-4
PJWY-W50A-4
PJWY-W50C-2
PJWY-W50C-3
PJWY-W50E-4
PJWY-W57A-4
PJWY-W57E-2
PJWY-W57E-3
PJWY-W57E-4
PJRY-W43
○
-
○
PJRY-W50
○
-
○
PJRY-W57
○
-
○
1
2
3
4
2
3
4
2
3
4
5
6
7
Shape Description
Content
Parts ID
Quantity
Post set
(standard)
PJRH-18A
PJRH-18B
PJRH-18C
Post set
(1pc)
(standard)
PJRH-18A-1
PJRH-18B-1
PJRH-18C-1
Post set
(long post)
PJRH-23A
PJRH-23B
PJRH-23C
2
1
1
1
1
2
1
1
1
1
1
1
1
Post
Post
Post
Round gutter
GA4923
Instruction manual
Post
Round gutter
GA4923
Round gutter
GA4923
Instruction manual
Post set
(1pc)
(long post)
PJRH-23A-1
PJRH-23B-1
PJRH-23C-1
Post set
(extra-long post)
PJRH-28F-1
PJRH-28G-1
Post
Round gutter
GA4923
Round gutter
GA4923
Instruction manual
Shape Description
Content
Parts ID
Quantity
2
1
PJWY-W43B-2
PJWY-W43B-3
PJWY-W43E-4
PJWY-W50A-4
PJWY-W50C-2
PJWY-W50C-3
PJWY-W50E-4
PJWY-W57A-4
PJWY-W57E-2
PJWY-W57E-3
PJWY-W57E-4
12
18
24
28
14
21
28
32
16
24
32
Length set
PJWY-W43B-2
PJWY-W43B-3
PJWY-W43E-4
PJWY-W50A-4
PJWY-W50C-2
PJWY-W50C-3
PJWY-W50E-4
PJWY-W57A-4
PJWY-W57E-2
PJWY-W57E-3
PJWY-W57E-4
Gutter
Main frame
Panel holder
(middle)
L=645
Panel holder
(end)
L=300
Round gutter
GA4923
Roof panel cushion
GB8274
Parts contents
□ Please open the captioned carton and check all contents in advance.
□ Please check the parts defective or any damage.
□ After opening the carton boxes, please store the products so that
they are not damaged.
□ We packed some extra screw in the parts box. （ x ） number is
necessary Q'ty for installation.
When △ mark is P, it’s the polycarbonate panel.
When △ mark is PS, it’s polycarbonate panel (SI)
When △ mark is CP, it’s the heat protection
polycarbonate panel.
When △ mark is CH, it’s heat protection FRP (SI)