♪ ♪
9kHz
♪ ♪
♪
10kHz
♪ ♪
♪
♪
11kHz
♪ ♪
♪
♪
♪
(5) 12kHz
♪ ♪ ♪
♪
♪
♪
(6) 13kHz
♪ ♪ ♪
♪
♪
♪
♪
(7) 14kHz
♪ ♪ ♪
♪
♪
♪
♪
♪
(8)
15kHz
♪ ♪ ♪
♪
♪
♪
♪
♪
♪
(9)
16kHz
Move the stick to full power to select the desired setting
(count the beeps
) in the
submenu.
Acknowledgement:
, the setting was saved.
Governor Mode(
♪
♪
♪
♪
♪
)
Move stick into full back position,
♪
Governor mode
OFF
♪♪
Governor mode
ON
Move the stick to full power after the hearing the desired beeps. Acknowledgement:
, the
setting was saved.
After setting the speed regulation, the ESC will learn
the operating speed at the next
start. It is therefore important to wait until you notice a small speed jump indicating
that the regulation
has been
activated.
If no selection has been made, the above menu options will start over again until a selection is
made.
Note:
The beep
s
always start
with the current setting. This
allows the ESC to send
a feedback to the
ESC settings.
After the setting of any of these parameters, moving the stick back to full back position will
arm the ESC. Alternatively the ESC can be disconnected and reconnected to allow the setting of
other parameters.