If the stick is
put
back to full back position, the ESC is armed and ready for
use
after the
ready signal sounds w
ere
heard. This applies to each programming step.
If no selection is made, the above selection menus start over again until a selection is made.
Battery-Typ
e
(
♪♪
)
Battery selection (Battery-Type):
Move stick into full back position again:
♪
NiMh
♪♪
Auto
♪ ♪
♪
Reserved
Move the stick to full power to select the desired setting in the submenu after hearing the beeps for
desired parameter. Acknowledgement:
,
Setting is done.
Timing(
♪♪♪
)
Timing setting:
Move the stick into full back position:
The ESC starts with a single beep (
30°
) and processed up successively to 7 beeps (Auto
Timing). Example: To set 18°
m
ove the stick to full power at the third beep signal.
♪
30°
♪ ♪
24°
♪ ♪
♪
18°
♪ ♪
♪
♪
12°
♪ ♪
♪
♪
♪
6°
♪ ♪
♪
♪
♪ ♪
0°
♪ ♪
♪
♪
♪
♪
♪
Autotiming
Move the stick to full power after selecting the desired setting sounds. Acknowledgement:
.
The selection is finished
PWM-Frequency(
♪
♪
♪
♪
)
PWM switching rate setting: Move stick into full back position
♪
8kHz