Enjoy!
l
Pre-flight adjustment and trimming must be done before flying. Check that all
linkages, nuts, servo horns, linkage nuts and screws are tightened. Make sure
thread locks are applied where necessary.
l
Ensure the flying field is spacious and safe to fly. Bench test the electronic power
system on load for 1 minute.
l
Check all electronic equipment. Range check the radio equipment. Test all
control surface are moving in their assigned directions before each flight.
l
Check battery voltage before use, even the batteries are recently charged.
l
After the first flight, it is prudent to check the CG for all subsequent flights.
Attention!
