Hobby Van Vantana 2016, Руководство пользователя

Страница: 98 / 191

7. Electrical Installations 97
General information regarding the TFT display
The time and date are buffered by a 3V 210 mAh, CR2032
type button cell. If, therefore, the time should be incorrect
or the clock should stop working, this button cell must be
replaced.
It is mounted on the reverse of the circuit board
j
of the
LCD display. To replace this button cell, the LCD display must
be removed from the furniture front by carefully clipping the
chrome-plated frame out of its holder. You will then see the
screws that fasten the plastic part to the furniture. Loosen
these screws to detach the display.
When replacing the button cell, please ensure that plus
and minus are in the right direction. Incorrect polarity may
cause the display to become defect.
1
Remote control(s), bed
3 2 1
• Briefly press the key on each remote control by the bed
to switch on the left light
j
, right light
l
. The key
k
switches the ceiling lights above the seating arrangement or
sleeping area on and off. Press longer on the key to regulate
how brightly you want the lights to shine. The brightness
you set will be saved; when the lights are switched on
again, the brightness you originally set will also be switched
on again.
Circuit board (reverse side)
of TFT display
The triangular lights are standard equipment. They have se -
parate switches on the lights that must be activated if you
wish to use the remote control to switch them on and off.