7. Electrical Installations 79
Manually calibrating the sensor
Opening the battery circuit breaker switches off the electro
-
nics in the superstructure (see item: battery circuit breaker).
Now the sensor can calibrate itself. This process takes approx.
three hours. If the battery circuit breaker is then switched on
again, a value of “1” should be shown on the display.
Charger (charging the battery)
Battery is charged when the charger is con-
nected to the 230V mains. The integrated fan
is activated.
Battery is charged via the generator. Motor has
been started. Battery charger is not activated.
During calibration, the vehicle must not be hooked up to
the 230V mains (the charger must not charge the battery
during calibration). Furthermore, the vehicle must not be
started while the sensor for the starter battery is being
calibrated.
Battery is charged when the charger is con-
nected to the 230V mains. The integrated fan
is deactivated.
Error messages
12:30
23,5 °C
09.01.15
18,0 °C
Warning message: undervoltage
This warning appears when a voltage of 10.8V or less is
measured for a battery for a duration of at least 3 minutes.
The icon for the battery, ancillary or starter battery in question
appears in the menu.
The message can be acknowledged; the battery should be
charged immediately.
Содержание Van Vantana 2016
Страница 1: ...MANUAL Version 12 2015 Van Vantana GB...
Страница 70: ...6 Interior Structure 69 K65 Vantana Seats 1 4 may be used while driving 4 3 1 2...
Страница 190: ...14 Technical Data 189 Index...
Страница 191: ...Hobby Wohnwagenwerk Ing Harald Striewski GmbH Harald Striewski Stra e 15 D 24787 Fockbek Rendsburg www hobby caravan de...