Hobby Van Vantana 2016, Руководство пользователя

Страница: 107 / 191

7. Electrical Installations 106
The battery sensor is protected by a 10 A .
• Always charge the ancillary battery for at least 10 hours before
each journey, directly after each journey and before you take
the van temporarily out of service.
- The battery is only charged if it has a minimum
voltage of 8 V.
- Use every opportunity during your journey to charge
the battery.
• If the vehicle is not in use for a longer period of time, the batte -
ry should be disconnected after it has been optimally charged
by switching the battery circuit breaker on.
• The battery loses its capacity after having been used
for a while and at low temperatures.
- A warning will go off if the battery ages to a value less
than 50% of its nominal capacity.
- If the battery voltage should be less than 10.0V, all
devices will automatically be switched off (exception:
12V (TV) sockets and antenna wiring).
Battery Sensor *
An Intelligent Battery Sensor (IBS) has been connected to the
battery terminal. It monitors the actual current and the actual
voltage in a highly precise manner.
It is possible to precisely predetermine the operating time of
the battery based on the actual consumption. The IBS ensures
that the battery will be changed in good time and assists in
providing active energy management so that the performance
requirements of the different electrical devices can be coordi
-
nated with the charging of the battery.
Intelligent Battery Sensor (IBS)
The charge state of the battery, age or remaining time until
discharge are all shown on the TFT display of the control panel.
Charging is carried out gently in accordance with the steady-
state principle by an "intelligent" charger.