❏
7. Repeat steps #3 through #6 for the left wing tip.
Your wing should like the above photo.
❏
8. Place the wing into position as shown.
❏
9. Place the fuselage top center cover as shown on
top of the wing and align it with the holes in the wing
and fuselage.
❏
10. Insert the two 20mm phillips head screws that
you removed earlier, being sure not to overtighten them,
which could crush the wing.
❏
11. Note that the motor covers are marked Left and
Right. Make sure that they are installed correctly. Place
one of the motor covers into place. Then, turn the model
over and insert one of the phillips head machine screws
that you removed earlier using your phillips screwdriver.
Do not overtighten these screws.
❏
12. Hold the remaining motor cover in place and
once again turn the model over and insert the remaining
phillips head machine screw into place.
6
