5
the operation of the model before every fl ight to insure that all equipment is
operating and that the model has remained structurally sound.
●
Please allow a 10 minute cool down period after each fl ight so the motor
controller and motors can cool down. Failure to do so may cause loss of control
due to the controller overheating and shutting down.
●
Inspect the rotor blades before each fl ight for nicks. If any damage is found,
replace the blades before fl ying the model again.
●
After a crash you must inspect all of the parts on the helicopter. Test all the
linkages for hidden cracks and make sure that all the metal parts are straight.
Before fl ying the model again, run the model at a reduced throttle setting for a
few seconds. Any unusual vibration is an indication of damaged shafts in the
head or tail assemblies.
Battery Warnings and Usage Guidelines
Please read and understand the following regarding the usage of
LiPo batteries.
●
Through the use of the included LiPo battery you have assumed all risk and
responsibility regarding a LiPo battery and its use.
●
ALWAYS unplug your battery from the charger/helicopter after use. NEVER
store your helicopter with the battery connected to the helicopter.
●
Do not attempt to charge your battery if it becomes swollen or hot.
●
It’s best to store your batteries charged and at room temperature. Storing a
fully discharged battery may cause irreversible damage to the battery.
●
Never disassemble, puncture or modify the battery pack in any way.
●
Never allow the battery temperature to exceed 150° F [65° C].
●
If your battery begins to swell or “puff” during charge or discharge or becomes
damaged in any way, stop using it and contact Hobby Services at 217-398-
0007 to learn the proper way to dispose your battery.
Charge Warnings
●
Only use the included charger with the included LiPo battery.
Do not attempt to use the provided charger with NiCd, NiMH or
batteries with other chemistries.
●
Do not leave the charger unattended while in use and always charge your
battery in a fi re-resistant location.
●
Disconnect the battery and remove input power from the charger immediately
if either becomes hot!
●
Do not allow water or other foreign objects to enter the charger. Keep the
charger away from moisture and do not submerge in water.
●
Please keep all electronic components out of the reach of children!
