12
Downloading the Video & Pictures from the Camera
Install the memory card into the card
reader. Plug the reader into the USB
port of your computer.
The USB connection will be auto
recognized and the files ready to be
transferred.
At this point you can copy or transfer your
files to your folder structure.
®
TROUBLESHOOTING
TROUBLESHOOTING
PROBLEM:
200FP V-Cam does not respond to any stick movements.
Solution 1:
Make sure that the battery voltage is above 8.0 volts
Solution 2:
If the LED on the control board is not steady, unplug the battery
and turn off the transmitter to allow the control board to reset itself. After
about a minute, turn on the transmitter and reconnect the battery.
PROBLEM:
The Camera System will not take a photo or start recording
a video.
Solution 1:
Install the memory card if it is not in the slot.
Solution 2:
Eject the card and check for any debris on the contacts.
Solution 3:
Make sure card is OK by putting the card in reader and checking
on your PC.
®
MAINTENANCE
MAINTENANCE
Replacing the Main Rotor Blades
1.
Unscrew the cover for the head button and remove the batteries.
2.
Unscrew the screw that holds the
base of the head button to the
main shaft.
