Hobbico FLITEWORK P-38 Lightning FLWA4120, Инструкция по эксплуатации

Страница: 8 / 12

- 8 -
Take the longer linkage wire and hook it into the servo
lever, using the 3 rd hole from outer side.
Do this work on the 2
nd
side in the same manner. Then put
the servo levers and the elevator flap in neutral position
and fix the linkage wire with the clamp screws. Use blue
locking agent for this screws.
Look for an exact neutral position of both servos and the
elevator flap.
For the rudder linkage you should use the middle length
linkages. Do the mounting procedure in the same manner
as you have done for elevator linkage.
Glue the rudder lever into the rudder flaps, that the clamp
screws do not point to the elevator.
Glue the aileron levers into the aileron flaps. The clamp
screws of the linkage holder should point to inner side.
Hook the linkage into the 2
nd
hole from outer side of the
servo lever, look for exact neutral position of aileron servo
and aileron flap and fix the linkage with the clamp screw.
Don’t forget to use blue locking agent for clamp screws.
The propeller consists of 3 propeller blades, the propeller
hub and the spinner.
Spinner and propeller blades are chrome plated.
The three blades of one package should be used toge-
ther, because they are preselected. Put the blades into the
hub part one, cover it with hub part 2 and screw the hub
together with controlled force.