Hobbico FLITEWORK P-38 Lightning FLWA4120, Инструкция по эксплуатации

Страница: 6 / 12

- 6 -
Patch the cables with the same numbering together.
1. Aileron 2. Elevator
3. Throttle 4. Rudder
5. Retract
Now you can close the fuselage with the turbo cap. Pro-
ceed with the second main wing and twin fuselage in the
same manner.
Before you glue the rudder blades to the fuselage, remove
the painting from the glueing areas by sanding it.
Take the carbon fiber tube and join the wings together. Put
the main fuselage onto the wing from the front side. Put
the Acryl plates into the recesses of the wings and screw
the wing to the fuselage. Use the longer screws in front.
Take care to meet the plastic inserts of the fuselage cor-
rectly.
If necessary, shorten the fitting a little bit, that you can glue
the rudder close to the end of the fuselage.
Glue the rudder, registration number on outer side, to the
twin fuselage, using 5 min. Epoxy glue. Fix the part with
pins, until the glue has hardened.
For mounting the elevator, you need the rectangular plas-
tic inserts like shown in the picture above. Now put the
elevator so into both rudder blades, that both rectangular
recesses are on the inner side of the rudder blades.