HNF-NICOLAI UD1 PedelecW, Руководство пользователя

Страница: 70 / 120

70
1.4. Use of a trailer or child seat
Due to the large number of available trailer / child seats, HNF can not give general
approval. Consult with HNF or a qualified dealer to check the compatibility of the
trailer / child seat with the Pedelec.
Depending on the type of trailer, the tire pressure of the rear wheel may
need to be increased. Remove the loaded trailer from the connection
point to the pedelec and hold it at the level of the connection point with
your hand. If you feel weight on your hand, you should increase the tire
pressure of the rear wheel.
When using a child seat, increase the air pressure in the wheel above
which the child seat is located.
2. Commissioning
This chapter explains how to get your UD1 ready for the road.
First, you should inflate the tyres. The recommended air pressure can be found in
section 3.1.
2.1. Adjusting the saddle height
• The correct saddle height is reached when
your leg is almost straight when putting the
ball of your foot on the pedal. The crank arms
are thereby aligned vertically.
• To check the saddle height, sit on the vehicle
and lean against a wall, for example.
To change the saddle height, proceed as follows:
• Loosen the screw of the seatpost clamp with
an Allen key until you can adjust the saddle
height.
• Then retighten the screw to a torque of
5-12 Nm.
The screw of the seatpost clamp is tightened enough when the seatpost
cannot be turned or when it no longer slides down into the seat tube un-
der your weight.
Comissioning