HNF-NICOLAI UD1 PedelecW, Руководство пользователя

Страница: 105 / 120

105
Once you have found the right positi on, fi rst ti ghten the grips ensuring that they
can sti ll be twisted. Tighten the upper T25 screw so that the upper gap between the
two halves is closed. In the next step, set the angle of the brake levers.
5.2.2. Brake lever angle
Adjust the angle of the brake levers so that your
fi ngers rest on the brake levers as you extend your
arms when sitti ng on the vehicle. Your wrist should
be as stretched as possible.
Then reti ghten the handlebar clamp screws of the
brake levers to a maximum of 4 Nm.
5.2.3. Adjusti ng the brake lever distance
The brake lever distance should be adjusted so
that the brake lever can be operated with the
fi rst phalanx of the 2 fi ngers in questi on. The
lever width can be adjusted with a Torx 25 key.
Adjust the screw at the marked positi on
①
.
①
6. Maintenance
In order to keep the vehicle functi onal and safe, it must be regularly maintained.
Please note the following informati on before every maintenance measure.
HNF-NICOLAI off ers a service concept.
Find out more at www.hnf-nicolai.com
Maintenance requires technical skills. You are responsible for the maintenance
work being carried out correctly.
-> If you do not feel confi dent doing the work, contact HNF-NICOLAI Ser-
vice or have a bicycle workshop carry out maintenance on the bike.
There is a risk of clamping and crushing during maintenance work. Your
fi ngers could get stuck between moving parts.
-> Pay careful att enti on to your hands and work.
Maintenance