102
Maintenance
5.3.1.
Brake lever angle
Adjust the angle of the brake levers so that your
fingers rest on the brake levers as you extend your
arms when sitting on the vehicle. Your wrist should
be as stretched as possible.
Then retighten the handlebar clamp screws of the
brake levers to a maximum of 4 Nm.
5.3.2.
Adjusting the brake lever distance
The brake lever distance should be adjusted so
that the brake lever can be operated with the first
phalanx of the 2 fingers in question. The lever
width can be adjusted with a Torx 25 key. Adjust
the screw at the marked position.
6.
Maintenance
In order for the vehicle to remain functional and safe, it must be regularly maintained.
Please note the following information before every maintenance measure.
Maintenance requires technical skills. You are responsible for the maintenance
work being carried out correctly.
-> If you do not feel confident doing the work, contact HNF-NICOLAI Ser
-
vice or have a specialist retailer carry out maintenance on the bike.
Risk of injury when carrying out maintenance
work on a drive system that is switched
on! Your hands may get stuck, for example
between the belt and the pulley, when the
drive starts up.
-> Remove the battery before carrying out
any maintenance work. This ensures the
rest position of the drive system.
Содержание SD1
