MADE IN GERMANY
www.hne.ag
Safety
valve
Legal inspections
Extinguishers are subject of periodic
checks for function and safety. Legally
prescribed inspections are country
specific and vary. The owner is
responsible for compliance with
prescribed intervals. Therefore, the
container is labeled with badges for the
date of manufacturing and the maturity
of the next inspection. The punched-out
areas mark the exact period.
Compressed air cylinders too must be approved and
tested regularly. Please keep yourself informed about the
regulations in your country.
The badge for the next inspection date must be updated
after every inspection.
Pressure safety
The entire pressure system is extremely
robust and designed to withstand high
overload. In addition, there is an
automatic pressure relief valve for safe
discharge of potential overloads. It is
located at the protected position
between container and backpack and
requires no maintenance.
The safety valve is precisely adjusted and sealed.
Do not adjust or work at it with tools.
If the safety valve is responding, only the effect, not
the cause of excess pressure is eliminated. The
device must be checked thoroughly before next use.
HiPRESS 50 - COLD METAL
