HMS R9254, Инструкция по эксплуатации

Страница: 14 / 26

9) Install the Left & Right Pedals
Attach the pedal straps(66) to the pedals (51),
attach the Left & Right pedals (51) to the Crank axis (29). The Left Pedal (51L) should be threaded on counter-clockwise. The
Right Pedal (51R) should be threaded on clockwise. (See figure 9)
NOTE:
The Left & Right Pedals (51)
are marked with “
L
” & “
R
”.
COMPUTER
BUTTONS:
1. MODE
Press this button to changeover display or choose the window needs to be set.
2. RECOVERY / UP
I. In setting status, press this button to increase setting value in relevant flashing window for
TIME, DIST, CAL and TEMP (
℃
or
℉
)
ii. In non-exercise or non-setting status, press this button to enter/exit pulse recovery function.
3. DOWN
In setting status, press this button to decrease setting value in relevant flashing window for TIME, DIST, CAL and TEMP (
℃
or
℉
)
4. RESET/GO
I. In setting status, press this button to reset the value in relevant flashing window for TIME, DIST and CAL.
ii. In parameters setting status for body fat, press this button to enter body fat test.
iii. In monitor status, hold this button for 3 seconds to reset all value to zero.
5. BODYFAT
In non-exercise status, press this button to enter/exit body fat parameters set-up.
FUNCTIONS
1. SPEED/BODYFAT RATIO/RPM (IF HAVE)
（
Display in A Window
）
I. Display instantaneous speed and the range is 0.0~99.9KM/H.Or,if the monitor showing M, the range will be
0.0~99.9MILE/H.The max. pickup signal is 1500rpm.
ii. Display current repetition per minute (RPM) during exercise. It reflects the pedal frequency. The range is 0~1500 rate per
minute. (IF HAVE)
iii. Display Body fat ratio.