HMS IXXAT CANbridge, Руководство пользователя, Страница: 14 / 30

Configuration 12 (28)
6.2 Creating the Configuration
6.2.1 Creating a Template with Download Tool
► Start CANBcfg.exe (see Starting and Operating the Download Tool CANBcfg, p. 11 ).
► Enter parameter -g (
CANBcfg —g
).
→ File template.clg is created.
►
Open the file template.clg with the text editor.
►
Save the file under a different name to prevent overwriting when generating a new
template.
►
Adjust the configuration settings in the template with the text editor.
► Make sure, that the frame format is always set.
In repeater mode both formats are received and transmitted, but the frame format must be defined.
►
Terminate the last configuration line in the configuration file with Return . Otherwise the
instruction is not executed.
►
Load the configuration on the device (see Load Configuration to Device, p. 17 ).
Template of Configuration File
[General]
ProductName = CANbridge
;! DO NOT CHANGE THIS LINE !
TemplateVersion = 01.01.00 ;! DO NOT CHANGE THIS LINE !
RepeaterFunctionality = yes ;yes, no
AutoBaudAttemptTimeout = no ;no, 1 ... 600 (in seconds)
CANBusOffRecovery = no ;no, 1 ... 60 (in seconds)
[User]
ConfigAlias = "Re Auto Baud (no Tx)"
[CANBus1]
BaudRate = Auto ;Auto, 1000, ..., 20, 0x00/0x0)
FrameFormat = std ;std, ext
UseGatewayTable = no ;yes, no
[CANBus2]
BaudRate = Auto
; Auto, 1000, ..., 20, 0x00/0x0C
FrameFormat = std ; std, ext
UseGatewayTable = no ; yes, no
[CAN1GatewayTable]
0x0 = 0x0
;normal id retransmission with the
0x1 = 0x1 ;same identifier on both sides
0x3 = 0x3 ;all possible entries are listed
0x4 = 0x4
…
[CAN2GatewayTable]
0x0 = 0x0
;normal id retransmission with the
0x1 = 0x1 ;same identifier on both sides
0x3 = 0x3 ;all possible entries are listed
0x4 = 0x4
…
CANbridge User Manual
4.01.0120.20000 2.1 en-US