36
H0103
Functions and Features:
TIME: Shows your elapsed workout time in minutes and seconds. Your computer will automatically count up
from 0:00 to 99:59 in one second intervals. You can also program your computer to count down from a set
value by using the UP and DOWN keys. If you continue exercising once the time has reached 0:00, the
computer will begin beeping, and reset itself to the original time set, letting you know your workout is done.
1. DISTANCE: Displays the accumulative distance traveled during each workout up to a maximum of
999.0KM/MILE.
2. RPM: Your pedal cadence.
3. WATT: The amount of mechanical power the computer is receiving from your exercise.
4. SPEED: Displays your workout speed value in KM/MILE per hour.
5. CALORIES: Your computer will estimate the cumulative calories burned at any given time during your
workout.
6. PULSE: Your computer displays your pulse rate in beats per minute during your workout.
7. AGE: Your computer is age-programmable from 10 to 99 years. If you do not set an age, this function will
always default to age 35.
8. TARGET HEART RATE (TARGET PULSE): The heart rate you should maintain is called your Target Hear Rate
in beats per minute.
9. PULSE RECOVERY: During the START stage, leave the hands holding on grips or leave the chest transmitter
attached and then press “PULSE RECOVERY” key, time starts counting from 00:60 - 00:59 - - to 00:00. As
soon as 00:00 is reached, the computer will show your heart rate recovery status with the grade F1.0 to F6.0.
1.0 means OUTSTANDING
1.0
＜
F
＜
2.0 means EXCELLENT
2.0
≦
F
≦
2.9 means GOOD
3.0
≦
F
≦
3.9 means FAIR
4.0
≦
F
≦
5.9 means BELOW AVERAGE
6.0 means POOR
Note:
If no pulse signal input then the computer will show “P” on the PULSE window. If the computer shows
“ERR” on the message window, please re-press the PULSE RECOVERY key and please make sure your hands
are keeping well on the grips or the chest transmitter is attached well.
10.
DISTANCE BAR: Every bar indicates 100 meter or 0.1 mile.
Key function:
There are 6 button keys and the function description as follows:
1. START/STOP key:
a. Quick Start function: Allows you to start the computer without selecting a program. Manual
workout only. Time automatically begins to count up from zero
b. During the exercise mode, press the key to STOP exercise.
c. During the stop mode, press the key to START exercise.
2. UP key:
a. Press the key to increase the resistance during exercise mode.
b. During the setting mode, press the key to increase the value of Time, Distance, Calories, Age and
select Gender and Program.
