33
H0103
13
23
15
17
21
80
7
34
8
11
9
1
2
17
16
A
6.
Connection of the upper handle bar (pic 6)
Fit the upper handle bar set left (13) onto the lower handle bar set left (21), then lock them up with screw
M8*20 (7), M8*20 spring washer (8) and arc washer OD20*ID8.5*1.5T (34). Then next step is to connect
the handle pulse wire (23) with Handle pulse connect wire (17). And then fit the connected wire into the
Wire protect end cap (11). Then put the connected wire ports into the left handle bar wire hole. And finally
put the #11 into the hole.
(Remark: the connection of the left is the same as the right.)
7. Connection of the computer (pic 7)
Take off the computer fixed screw(2) on the back of the
computer(1), connect the handle pulse wire(A) which is out
of the computer to the handle pulse wire (17) which is out of
the computer fixed piece, then insert the sensor wire(16)
which is out of the computer fixed piece to the insert hole of
the back of the computer. Finally, attach the computer to the
computer fixed piece, fasten them with computer fixed
screws which are took off before.
Pic.6
Pic.7
B
C
